CREW offers Open Access

CREW is in continuous Open Access phase to support your experiments free of charge!

Final public event & Globecom tutorial

CREW will present its final results at the Wireless Community event (Leuven, Belgium, 29 October 2015, more info) and organises a hands-on tutorial at Globecom (San Diego, USA, 10 December 2015, more info)

CREW PORTAL: access the CREW facilities

Interested in using the CREW facilities?
[Start here] - [Browse by name] - [Overview images] - [Advanced info] - [WTA GitHub].

Spectrum analyser remote access

The main spectrum analyser in the testbed room is a Rohde & Schwarz FSVR real-time analyser.

  • Host name: ctvr-analyser.cs.tcd.ie
  • IP address: 134.226.55.156
  • Frequency range: 10Hz - 7GHz
  • Frequency range: 10Hz - 7GHz
  • Support for IQ analysis (inc. OFDM)
  • Maximum sampling rate for IQ acquisition: 128MS/sec

The spectrum analysers are situated as shown in the testbed layout diagram; however, we can easily relocate the receive antenna of the spectrum analyser around the lab if needs be for a certain experiment. We also have in the testbed:

  • Rohde & Schwarz SMU 200A - Vector Signal Generator
  • Anritsu MS2781B - Signal Analyser
  • Anritsu MS2721B - Spectrum Master (handheld spectrum analyser)

Tested_Calendar

Probably the easiest way to acquire data from the Rohde & Schwarz spectrum analyser is using the testbed Windows node "Trinity-8170896" which is accessible via VNC through the ctvr-gateway node. This node runs Rohde & Schwarz IQWizard, a programme which allows simple acquisition of IQ data, in a range of formats. However, remote access directly to the spectrum analyser via VNC is also available.

Remote access via VNC

The spectrum analyser can be accessed from any of the testbed nodes or from the ctvr-gateway server. Information on obtaining access to these nodes can be found here.

* Verify that the analyser is switched on and connected to the network by pinging it using

ping ctvr-analyser.cs.tcd.ie

* Use a VNC client to connect to ctvr-analyser.cs.tcd.ie

Remote control and IQ acquisition using Matlab

It is also possible to perform remote control and IQ acquisition using Matlab.

AttachmentSize
Generators and Analysers - one SigGen.jpg87.51 KB